Shop by category
Plastic sheets
Plastics Hub NZ supplies plastic sheet across New Zealand, from clear acrylic and tough polycarbonate to HDPE, PVC, corflute and aluminium composite panel. Each material suits different jobs, so start with what the sheet is for.
Use the guide below to narrow it down, open a material for its properties and common sizes, or send us an enquiry and we'll recommend one.
Which sheet do I need?
A starting point by job. Each product page has the detail, and we're happy to confirm the choice on your quote.
Sheet by material
-
Acrylic sheet
Clear, opal, coloured and mirror sheet for signs, displays and splashbacks.
View Acrylic -
Polycarbonate sheet
Very tough clear flat sheet for guards, screens and impact-prone glazing.
View Polycarbonate -
PETG sheet
Clear, tough sheet that bends without cracking.
View PETG -
Corflute sheet
Light, cheap fluted board for signs and protection.
View Corflute -
ACM aluminium composite panel
Rigid, flat aluminium-faced panel for signs and linings.
View ACM / ACP -
PVC foam board
Light, rigid foamed PVC for signs, displays and models.
View PVC foam board -
Rigid PVC sheet
Solid, chemical-resistant sheet for tanks, ducts and linings.
View Rigid PVC -
HIPS sheet
Low-cost, easy-to-form sheet for vacuum forming and displays.
View HIPS -
Polypropylene sheet
Light, chemical-resistant sheet for tanks, trays and linings.
View Polypropylene -
UHMWPE sheet
Exceptional wear resistance and a slippery surface for liners and wear strips.
View UHMWPE sheet -
HDPE sheet
Tough, easy-clean sheet for boards, linings and marine fit-outs, including Seaboard.
View HDPE sheet -
Acetal sheet
Stiff, stable plate for jigs, wear pads and milled parts.
View Acetal sheet -
Nylon sheet
Tough, hard-wearing plate for wear pads, slides and liners.
View Nylon sheet -
PTFE sheet
Lowest-friction sheet for gaskets, slide pads and chemical linings.
View PTFE sheet
Clear sheet
Acrylic is the clearest and most scratch resistant, polycarbonate is the toughest, and PETG sits between them for thin display work. All three are supplied as flat solid sheet; we do not supply twin-wall or corrugated polycarbonate.
Sign sheet
Corflute is the low-cost choice for temporary signs, PVC foam board gives a smooth face for indoor signs, and ACM is the rigid, long-life panel for permanent signs. We supply blank sheet; printing is done by you or your sign maker.
Industrial and food-area sheet
HDPE, UHMWPE, polypropylene and rigid PVC handle water, chemicals and wear. Where a job needs a food-contact or fire-rated grade, confirm the grade with us.
How to order
- Send us an enquiry through the quote form or email trade@plasticshub.co.nz.
- Tell us the material, thickness, colour, sheet size and quantity, and the town or city it is going to.
- We'll come back with a quote, including delivery.
Need it cut? Cutting is available on certain materials at certain depots. Request a quote with your sizes and we'll confirm.
Plastic sheets questions
- What is the best clear plastic sheet?
- It depends on the job. Acrylic is the clearest and resists everyday scratches best, polycarbonate is far tougher where the sheet might be hit, and PETG suits thin display work. Our acrylic vs polycarbonate comparison goes through the differences.
- What plastic sheet is best for outdoor signs?
- ACM is the usual choice for permanent outdoor signs, acrylic suits high-end and illuminated signs, and corflute is the low-cost choice for temporary signs.
- Which plastic sheet is food safe?
- HDPE, UHMWPE, polypropylene, PETG and some other materials are made in food-contact grades, but not every sheet is one. Confirm the grade with us if your job needs it.
- Do you supply twin-wall or corrugated polycarbonate?
- No. Plastics Hub NZ supplies solid flat polycarbonate sheet only.
- Can you cut plastic sheet to size?
- Cutting is available on certain materials at certain depots. Request a quote with your sizes and we'll confirm.
Tell us what you need. We'll source it.
One enquiry, multiple supply sources. Or email trade@plasticshub.co.nz.